Mustang Saleen Decals 1/24 1/25

These are designed to fit the Saleen Conversion Body Kit

They may need slight trimming depending on the scale you are buliding.

Pick your color - all sets include the yellow "SALEEN" decal.

Application Instructions

• Decals do not require a clear coat before installation.

• Ensure the surface is clean and free of dust. A high-gloss finish is recommended—the smoother the surface, the more opaque and realistic the decals will appear.

• Cut out each decal as close to the graphic as possible. Avoid cutting in square shapes; rounded corners work best.

1. Soak the cut decal in room-temperature distilled water for 20–30 seconds. Adding a few drops of Micro Set (optional) is recommended.

   • Release time may vary depending on water temperature; warmer water will loosen the decal faster.

   • Do not remove the decal from the backing paper, as the paper helps with positioning on the model.

2. Apply water and/or Micro Set (optional) to the model surface. A mixture of water with a few drops of Micro Set works best.

3. Remove the decal from the water and place it onto the model surface. Gently slide the backing paper out from underneath the decal.

4. Once positioned, carefully remove excess water using a cotton swab, paper towel, or soft paint brush.

Disclaimer:
Decals are fragile and should be handled with care to avoid tearing or damage during installation. We are not responsible for damage caused during application.