Skip to product information
1 of 1

(Purple) Insta-Cure+™ Super Glue, CA Medium Thickness Adhesive BSI

This is our favorite brand of adhesive when building.
Perfect for our printed parts and excellent for traditional cast resin and plastic.

1 free extender tip for every bottle ordered.

 

"Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.."

Regular price $4.00
Regular price Sale price $4.00
Sale Sold out
Shipping calculated at checkout.
Size

Additional details

- Parts are 3d printed in resin
- Some parts may come attached to the support tree
- Sprue cutters are recommended to detach parts
- Some pieces are delicate so take your time
- Any brand CA or super glue is recommended
- There are no assembly instructions. Please use the pictures for guidance.

Recommended decal application (if applicable):

- Cut each decal as close as possible to the letters
- Dip in warm water for 10-15 seconds
- Slide off paper and apply
- Setting solution encouraged.

Recommended cleanup process:

Click here> Recommended Prep