1 1

2K Ultra Matte Clear by Splash Paints

2K Ultra Matte Clear by Splash Paints

THIS PAINT REQUIRES CATALYST.  CATALYST CONTAINS ISOCYNATOMETHYL

Items included:
Clear Coat 1oz. (30mL)
Catalyst .3oz. (10mL)

Mix 3:1 thoroughly prior to application.

Recommended Application
-1st coat: Tack coat
Flash off 5 minutes
-2nd coat: Wet coat
Flash off 5 minutes

DO NOT EXCEED 2 COATS. ADDITIONAL LAYERS WILL MAKE SURFACE GLOSSY.

Cure at room temperature for 24 hours before handling/sanding or 30 minutes in dehydrator @140F.

HARMFUL VAPORS. 
WEAR ORGANIC VAPOR RESPIRATOR WHEN IN USE. 
USE IN WELL VENTILATED AREA ONLY.
KEEP OUT OF CHILDREN'S REACH
FLAMMABLE , KEEP AWAY FROM ALL HEAT SOURCES.


$13.49
$13.49
Sale Sold out
Shipping calculated at checkout.

Additional details

- Parts are 3d printed in resin
- Some parts may come attached to the support tree
- Sprue cutters are recommended to detach parts
- Some pieces are delicate so take your time
- Any brand CA or super glue is recommended
- There are no assembly instructions. Please use the pictures for guidance.

Recommended decal application (if applicable):

Make sure the surface is clean and free of any dust. Ensure the surface has a high gloss finish.

Cut out the decal as close to the graphic as possible (do not cut in squares, should be cut with round corners).

  • BLUE BACKING PAPER-Soak cut decals in distilled water for 20 - 30 seconds till decal slides freely on paper.(Time will vary-the warmer the water the quicker the decals will release). Don't remove decal from paper (paper is needed to help position decal on the model.
  • WHITE BACKING PAPER (neons & metallics) Using warm water soak till decal slides freely on paper (Time will vary 30 seconds or more). Don't remove decal from paper. The paper is needed to help position decal on the model.

Optional: Apply water and/or Microset to the surface of model. Using water with a few drops of Microset is ideal.

Remove decals from water and place on model surface, gently slide decals off paper onto surface. Once decal is in place remove excess water with cotton swab, paper towel or soft paint brush

Disclaimer: Decals are fragile, take time and care when handling to prevent tearing and damaging the decal. We are not responsible for damage during your installation.

Recommended cleanup process:

Click here> Recommended Prep

View full details