Skip to product information
1 of 1

Decals for Corvette Summer Stingray 1/25

Launch: 1/28/23 11:AM PST

Corvette Summer decals

These are the decals for our Corvette Summer kits.

These cannot be purchased without a kit. Orders with only the decals will be canceled and refunded without notice.

NOTEThese are not meant to represent an exact replica. It's a good starting point only for the graphics. We've taken some creative liberties to offer a product similar to the 1:1 you may be familiar with.

These decal sets are ready to ship. We will not be restocking them once sold out.


Application Instructions

Make sure the surface is clean and free of any dust. Ensure the surface has a high gloss finish.
Cut out the decal, try to cut as close to the graphic as possible.(do not cut in squares, should be cut with round corners)

BLUE BACKING PAPER-Soak cut decals in distilled water for 20 - 30 seconds till decal slides freely on paper. (Time will vary-the warmer the water the quicker the decals will release) Don't remove decal from paper (paper is needed to help position decal on the model.

Apply water and/or Micro Set (optional)to the surface of model. Using water with a few drops of Micro Set is ideal.
Remove decals from water and place on model surface, gently slide decals off paper onto surface. Once decal is in place remove excess water with cotton swab, paper towel or soft paint brush.

If you are taping to paint over them, you will need to seal first. Tape will pull ink off.

Disclaimer: Decals are fragile, take time and care when handling to prevent tearing and damaging the decal. We are not responsible for damage during your installation.

Regular price $13.00
Regular price Sale price $13.00
Sale Sold out
Shipping calculated at checkout.

Additional details

- Parts are 3d printed in resin
- Some parts may come attached to the support tree
- Sprue cutters are recommended to detach parts
- Some pieces are delicate so take your time
- Any brand CA or super glue is recommended
- There are no assembly instructions. Please use the pictures for guidance.

Recommended decal application (if applicable):

- Cut each decal as close as possible to the letters
- Dip in warm water for 10-15 seconds
- Slide off paper and apply
- Setting solution encouraged.

Recommended cleanup process:

Click here> Recommended Prep